Home
Product
Configure aylook Accessories Integrations Licenses
Solutions by sector
Case history
Company
About Training
Support
Services Software & App Documentation Firmware & releases
Agreements
Login
Contact
Aylook servers older than 9.2 using the Aycloud service are at risk of Cyberattack! Read more
Firmware & Releases

What changed, and what you need to run it - for every component.

Aylook Firmware, ASC and the iOS and Android apps each have their own version and release notes, split into new features and bug fixes.

Aylook servers older than 9.2 using the Aycloud service are at risk of Cyberattack! Read more

Aylook Firmware

9.2.4Current
Requirements: ships as an SWU (Software Update) package, ready to install directly on Aylook hardware - no separate software prerequisites.

Requires ASC v.1.2 or newer

New

  • Installation medium as a bootable ISO that already carries the cloud portal access code - write it to a USB key with any standard image writer; it replaces the USB image
  • Quick installation: the installer asks only for the model and works out everything else; the full interactive installation stays in the boot menu
  • HTTPS available right after installation: a self-signed certificate is created at the first start-up

Security improvements

  • ASC 1.0.44 and 1.0.45 are now refused like every ASC older than 1.2
  • New option, off by default, to refuse remote logins that still use the old password method
  • PHP updated to the current Ubuntu security release

Bug fixes

  • Fixed new accounts created from the web interface not being able to log in; a new account is now enabled and valid until 2099-12-31 unless changed
  • Fixed users without setup permission not being able to change their own password, including the change required at first login
  • Fixed read-only actions, such as login and logout, being recorded in the audit trail as changes
  • Fixed every appliance reporting the same host name: it now comes from the serial number, and a name set by the operator is kept
  • Fixed the installer offering its own installation medium as the target disk
  • Fixed HTTPS being lost at the first update from a release older than 9.2.2
  • Fixed the request limit still blocking some client sessions
  • Fixed the Save button being pushed out of view in the user settings of the web interface
Install package not publicly downloadable - contact technical supportRelease notes
9.2.2
Requirements: ships as an SWU (Software Update) package, ready to install directly on Aylook hardware - no separate software prerequisites.

Requires ASC v.1.2 or newer

New

  • Arm and disarm of the recorder: disarming stops motion events from the cameras while recording and the timeline go on - available with the new Arm/disarm licence module and the user's arm/disarm permission
  • Installation USB image that already carries the cloud portal access code - ready to write, with no file to copy by hand
  • Network error counters per network card in the statistics page, and a connection-quality chart that states what it measured

Security improvements introduced in the 9.2 major version

  • Passwords stored with modern salted protection, converted automatically at each user's first login
  • Shared default password removed - the administrator sets every new password, under a minimum length and complexity policy
  • A session is no longer tied to the password: logging in creates a session that can be closed
  • Accounts can be switched off without being deleted, or given an expiry date; switching one off closes its open sessions immediately
  • Arm and disarm of an alarm panel always checks the individual user's permission, with no administrator fallback for local connections
  • Complete audit trail of privileged actions, with system log and audit trail forwarding to a central collector
  • Permanent record of which system partition the appliance started from, including a failed start-up that was rolled back
  • Session identity moved to cookies for the API and the web socket, keeping credentials out of addresses

Bug fixes

  • Fixed cameras that stopped recording and only recovered after a reboot
  • Fixed the HTTPS certificate being lost after a software update
  • Fixed restart and shutdown hanging when the database could not complete its final save
  • Fixed wrong zone numbers on SmartLiving alarm panels
  • Fixed the request limit blocking ordinary client sessions
  • Fixed outdated client programs receiving a wrong-password message instead of a version message
  • Fixed the audit database growing by about 175 MB per day
  • Reduced memory use on machines with 8 GB
Install package not publicly downloadable - contact technical supportRelease notes
9.1.25
Requirements: ships as an SWU (Software Update) package, ready to install directly on Aylook hardware - no separate software prerequisites.

New

  • Permission to arm and disarm an alarm panel can be granted per user group
  • The arm/disarm function can be switched off entirely, for installations that must not offer it
  • In the camera list of the alarm-zone settings it is now possible to select cameras belonging to a connected (slave) Aylook

Bug fixes

  • Fixed recordings that stopped being written to disk without being noticed; they are now supervised and restarted
  • Fixed connections to cameras, alarm panels and I/O devices staying stuck after a network drop until the next restart
  • Fixed malformed messages from a device blocking device discovery or freezing a panel driver
  • Fixed number plates not being recognised when spacing or dashes differed, so a registered plate was treated as unknown
  • Fixed plate readings from Hikvision cameras being lost, and events arriving without a plate producing an error
  • Fixed archive disks being declared removed when the hardware reported a different serial number, which stopped the start-up
  • Fixed backup reconnecting over and over to a backup store that was working normally
  • Fixed restoring a saved configuration removing the IDL activation, which made cameras fall back to motion detection and produce false alarms
  • Fixed the repeated restart/reboot loop
  • Fixed the Network Monitor ASC page staying black
Install package not publicly downloadable - contact technical supportRelease notes
9.1.23
Requirements: ships as an SWU (Software Update) package, ready to install directly on Aylook hardware - no separate software prerequisites.

New

No new features in this release

Bug fixes

  • Fixed a playback issue
  • Fixed camera connectivity issues for license plate recognition (Hikvision)
  • Fixed timeline staying yellow after the first detection when cameras are disabled
  • Fixed every plate being read twice by the entrance camera (Tattile)
Install package not publicly downloadable - contact technical support

ASC (Aylook Security Control)

1.2.3Current
Minimum requirements:
  • Supported servers: Aylook 8.1, 9.0, 9.1 and ≥ 9.2
  • Full feature set (incl. secure login): Aylook ≥ 9.2.0
  • Alarm Panels configuration: Aylook ≥ 9.1.20
  • Advanced Sensors: Aylook ≥ 9.1.14
  • Backup Config: Aylook ≥ 9.1.11
  • Branding: Aylook ≥ 9.0.12
Note: on older servers, incompatible tabs are hidden automatically. On servers older than 9.2, ASC uses the ASC 1.0 login method.

New

  • Setup > Users on Aylook 9.2: new users get a password typed by the administrator and checked against the server's password policy, plus «Account enabled» and «Valid until» (2099-12-31 by default), both also shown in the users table
  • Arm/disarm controls (toolbar button, armed mode in Advanced Sensors, lock icon on cameras) shown only when the Arm/disarm licence module is active
  • Lower memory use: about 140 MB less for each open window

Bug fixes

  • Fixed deleting a user from Setup > Users being refused by the server
  • Fixed high CPU and memory use, with repeated restarts, when ASC runs as the network monitor of an Aylook (since ASC 1.0.43)
  • ASC now recovers by itself from a display crash instead of closing
  • Passwords typed in the user settings are no longer written to the client log
  • Removed the empty "User profiles" and "User access control" tabs
1.2.2
Minimum requirements:
  • Supported servers: Aylook 8.1, 9.0, 9.1 and ≥ 9.2
  • Full feature set (incl. secure login): Aylook ≥ 9.2.0
  • Alarm Panels configuration: Aylook ≥ 9.1.20
  • Advanced Sensors: Aylook ≥ 9.1.14
  • Backup Config: Aylook ≥ 9.1.11
  • Branding: Aylook ≥ 9.0.12
Note: on older servers, incompatible tabs are hidden automatically. On servers older than 9.2, ASC uses the ASC 1.0 login method.

New

  • ASC 1.2 now connects to Aylook servers older than 9.2 (9.1, 9.0, 8.1) - one client for mixed installations
  • Login method chosen automatically from the server's capabilities - nothing to configure
  • Password change supported on servers older than 9.2
  • Smaller Linux installer (96 MB instead of 151 MB)

Bug fixes

  • Fixed ASC stopping responding a few minutes after login on Aylook 9.2 when maps are in use ("rate limit" errors)
  • Fixed "This server does not support secure authentication" error when connecting to servers older than 9.2
1.2.1
Minimum requirements:
  • Supported servers: Aylook 8.1, 9.0, 9.1 and ≥ 9.2
  • Full feature set (incl. secure login): Aylook ≥ 9.2.0
  • Alarm Panels configuration: Aylook ≥ 9.1.20
  • Advanced Sensors: Aylook ≥ 9.1.14
  • Backup Config: Aylook ≥ 9.1.11
  • Branding: Aylook ≥ 9.0.12
Note: on older servers, incompatible tabs are hidden automatically. On servers older than 9.2, ASC uses the ASC 1.0 login method.

New

  • ASC 1.2 now connects to Aylook servers older than 9.2 (9.1, 9.0, 8.1) - one client for mixed installations
  • Login method chosen automatically from the server's capabilities - nothing to configure
  • Password change supported on servers older than 9.2
  • Smaller Linux installer (96 MB instead of 151 MB)

Bug fixes

  • Fixed ASC stopping responding a few minutes after login on Aylook 9.2 when maps are in use ("rate limit" errors)
  • Fixed "This server does not support secure authentication" error when connecting to servers older than 9.2
1.0.49
Minimum requirements:
  • Full feature set: Aylook ≥ 9.1.20
  • Advanced Sensors: Aylook ≥ 9.1.14
  • Backup Config: Aylook ≥ 9.1.11
  • Branding/Proxy: Aylook ≥ 9.0.12
Note: on older servers, incompatible tabs are hidden automatically.

New

  • New built-in Log Viewer - text search, date filter, anomaly detection
  • App errors now auto-saved to the log (useful for support)
  • Large log files (e.g. 170MB) now open normally, with a date range filter
  • Aylook server audit files can be opened in the Log Viewer
  • Alarm panel configuration integrated into ASC - zones, partitions, outputs with camera assignment
  • User and profile management now in a native "Users" tab (Administrator group only)
  • Multi-accelerator Hailo support - model assignment, chip temperature, reassignment from ASC
  • ARM/DISARM is now a separate permission - users without it see a disabled button
  • Right-click context menu (Cut/Copy/Paste) in all text fields

Bug fixes

  • Fixed video not starting during quick camera switching
  • Faster connection with a clear error message (instead of a 2.5 min wait)
  • Fixed monitor getting stuck on the wrong camera during rapid events
  • Fixed white screen for English-interface users after connecting
  • Fixed Player not uninstalling correctly on Windows
  • Fixed display mode setting not remembered after restart
  • Fixed slow arm/disarm button update after login
  • Fixed alert sound playing despite notifications being disabled
  • Fixed error opening the notification list for events with no preview
  • Various crash fixes on panel resize/close
  • Faster, more stable Video Analysis screen

Aylook Pro - iOS

2.4.17Latest stable
Minimum requirements: iOS 15.6 or later

New

  • Added a notice in the account setup screen explaining that push notifications rely on third-party services (Apple APNs, Google), so delivery and timing cannot be guaranteed.

Bug fixes

  • Fixed live video dropping to about 1 fps after changing the visualization quality.
  • Fixed the OSD timestamp being partially hidden by the Favourites section in the player.

Aylook Pro - Android

2.4.73Current
Minimum requirements: Android 8.0 (API 26) or later

New

No new features in this version.

Bug fixes

  • Fixed recordings being shown with a time offset (about 2 hours) compared to the actual recording time.

Not sure if your unit can update?

Tell us your model and current version and we'll confirm.

Contact us